Official HeliumStrike partnerSee your dispatch date before you pay12-month warranty
TankOtter Forge

Our mods

Every mod we fit, what it changes and what it costs, for a new controller and for a send-in. The builder checks which mods work together, so you can't pick a combination we can't build.

Included with every build

  • A free USB-C port in place of the micro-USB port on every TankOtter Custom, because its 8K board needs it. On a send-in, the USB-C port is £15.00, and it's added for you if you choose an 8K board.
  • Send-ins also get an ultrasonic clean of the shell before we start work.
The four TMR thumbsticks we fit: K-Silver JS13 Pro+, closest to the original; Ginfull DS13 Max, light around the centre; Ginfull RS13, a touch firmer; and K-Silver JT13, with adjustable tension.

TMR thumbsticks

TMR sticks use contactless magnetic sensors, so they're built to resist drift and stay precise. We fit the three we rate highest (we've used each one ourselves), plus an adjustable-tension option.

Every new controller comes with TMR thumbsticks: choose any of the three at no extra cost, or the adjustable-tension K-Silver JT13 for £15.00 more. For a send-in, keep your original sticks or have TMR fitted. How each one feels is under its name below.

You can also have Leadjoy Magic Caps on your thumbsticks for £10.00: No.1 is textured, for balanced control, and No.2 has a raised curve, for aggressive control.

Not sure which sticks to choose? See our quick guide

OptionNew controllerSend-in
Keep my original sticks—Included
K-Silver JS13 Pro+ TMR sticksThe closest feel to the original ALPS sticks on PS4 and PS5 controllers: even resistance all the way, on the heavy side.Included£15.00
Ginfull DS13 Max TMR sticksVery light resistance around the centre, so small aim adjustments in shooters feel effortless. Pressing the stick in (L3/R3) has a little pre-travel before it clicks.Included£15.00
Ginfull RS13 TMR sticksClose to the DS13 Max, but a touch heavier. Pressing the stick in clicks straight away, with no pre-travel.Included£15.00
K-Silver JT13 adjustable-tension TMR sticksSet the tension yourself: twist the stick to make it lighter or heavier. There's no need to open the controller.£15.00£30.00
Leadjoy Magic Cap No.1 thumbstick capsTextured, for balanced control.£10.00£10.00
Leadjoy Magic Cap No.2 thumbstick capsA raised curve, for aggressive control.£10.00£10.00
The 8K boards we fit: SuiOvOi 8K, HeliumStrike 8K and MH4-ANALOG 8K, and the HeliumStrike 2 8K, coming soon.

8K board

A standard DualShock 4 reports to a PC 250 times a second over USB. An 8K board replaces the controller's own mainboard and reports up to 8,000 times a second, so every press and stick movement reaches your game sooner.

We fit the SuiOvOi 8K, the HeliumStrike 8K (formerly HyperStrike) and the MH4-ANALOG 8K by Marius Heier, and the HeliumStrike 2 8K is coming soon. Every TankOtter Custom comes with one; on a send-in, it's up to you. They all work on a Windows PC over a USB cable, with no wireless. The SuiOvOi 8K also works on a PS4 console; the HeliumStrike 8K and MH4-ANALOG 8K won't work on a PS4 or PS5. They always need the USB-C port. On a send-in, your battery has to come out, and we recycle it for you. You also need new TMR sticks. Your original mainboard comes back with your controller. The SuiOvOi 8K, HeliumStrike 8K and MH4-ANALOG 8K can't use the rumble motors, so those come out, and the touchpad works as a button only: it clicks, but swipes and other touch controls don't work. They also have no sound and no motion controls. The HeliumStrike 2 8K keeps rumble, the touchpad and motion controls, but has no sound either. With an 8K board, we recommend instant-click face buttons, D-pad, bumpers and triggers. How to set it up on PC.

With an 8K board, you can map rear buttons and extra bumpers to any button on the controller. The MH4-ANALOG 8K can only map them to controller buttons; the other 8K boards can also map them to keyboard keys, and depending on the brand, some support macros. What you can map them to.

In our studio, the SuiOvOi 8K, HeliumStrike 8K and MH4-ANALOG 8K all average 8,000 Hz. Readings move a little during a test: 7,685–8,011 Hz on the SuiOvOi 8K, 7,771–8,016 Hz on the HeliumStrike 8K and 7,786–8,015 Hz on the MH4-ANALOG 8K. That's not always down to the board: the test PC and the data cable make a difference too.

Latency is lowest on the MH4-ANALOG 8K, then the HeliumStrike 8K, then the SuiOvOi 8K, but the gaps are so small you're very unlikely to feel them. We think the HeliumStrike 8K has the best settings software; the MH4-ANALOG 8K and SuiOvOi 8K are about the same. All three suit competitive FPS players.

About each board: SuiOvOi 8K, HeliumStrike 8K, MH4-ANALOG 8K and HeliumStrike 2 8K.

OptionNew controllerSend-in
SuiOvOi 8K board£49.00£49.00
HeliumStrike 8K board (formerly HyperStrike)£49.00£49.00
MH4-ANALOG 8K boardBy Marius Heier.£89.00£89.00
HeliumStrike 2 8K boardTBDTBD

Good to know

  • SuiOvOi 8K board: works on a Windows PC or a PS4 console over a USB cable, with no wireless. The touchpad still clicks, but swipes and other touch controls don't work. There's no sound (the speaker and headphone jack don't work) and no motion controls.
  • 8K board: works on a Windows PC over a USB cable only, with no wireless. It won't work on a PS4 or PS5 console. The touchpad still clicks, but swipes and other touch controls don't work. There's no sound (the speaker and headphone jack don't work) and no motion controls.
Three Kailh switches: the instant-click switches we fit as standard.
Omron switches, on request: 60gf (blue) and 120gf (white).

Instant-click buttons

Fits a small click switch under each button for a short, crisp click, like a mouse button. Built for shooters: every press registers fast and feels the same. Instant-click L2 and R2 click on or off, with no half press, so they're not suited to racing games. You may also see these called mouse-click or clicky buttons. Choose just the bumpers and triggers (L1, R1, L2 and R2), or the face buttons, D-pad, bumpers and triggers: 12 buttons in all.

OptionNew controllerSend-in
Instant-click bumpers and triggersL1, R1, L2 and R2.£29.00£29.00
Instant-click buttons (face buttons, D-pad, bumpers and triggers)Triangle, Circle, Cross, Square, the D-pad, L1, R1, L2 and R2: 12 buttons in all.£39.00£39.00

Good to know

  • Instant-click triggers: L2 and R2 click on or off, with no half press. That's ideal for shooters, but not suited to racing games.
3D render of the top edge of a black PS4 controller, with four white extra bumpers between L1 and R1.
Where the extra bumpers go: 2 extra bumpers, forward or backward, or 4 extra bumpers in a front pair and a back pair, on the top edge between L1 and R1.

Extra bumpers

Extra bumpers on the top edge, between L1 and R1. They take the place of the light bar, and they're our own design. Choose 2, forward or backward (the way the raised tab on each pad points), or 4.

Use them for jumping, crouching, reloading, plating up, melee attacks, throwing grenades, using tactical equipment, or anything else you like.

Each one moves on a stainless steel pivot and bushing, for clear feedback and a better feel on every press.

They sit lower than the bumpers and triggers, so your index and middle fingers can stay naturally curled as you hold the controller. They're about one finger joint away from the bumpers and triggers, so you won't press them by mistake. Want them closer or further away? We can make them in a different length: ask us for a quote.

With an 8K board, which every TankOtter Custom has, you can map them to any button. On a send-in without an 8K board, each one is wired to a face button or D-pad direction of your choice. What you can map them to.

OptionNew controllerSend-in
2 extra bumpers (forward)The raised tab on each pad points forward, towards L1 and R1.£19.00£19.00
2 extra bumpers (backward)The raised tab on each pad points back, towards L2 and R2.£19.00£19.00
4 extra bumpers£29.00£29.00
3D render of the back of a black PS4 controller, with two pairs of white round rear buttons: the upper pair and the lower pair.
3D render of the back of a black PS4 controller, with silver half-dome paddles: our DSE-style rear buttons.

Rear buttons

Rear buttons, also called back buttons or paddles, sit on the back of the grips. We fit two kinds.

Round rear buttons sit close to the shell, so they're easy to press. Fitting them means taking out the rumble motors, so the controller won't vibrate. On a send-in, the motors come back with your controller.

DSE-style rear buttons use the metal paddles from the DualSense Edge's back buttons, on our own mechanism. On a send-in, your battery has to come out for them, and we recycle it for you. The lever paddles get in the way of the upper round rear buttons; the half-dome paddles don't.

Both kinds have the same instant-click switches as our buttons and triggers.

With an 8K board, which every TankOtter Custom has, you can map them to any button. On a send-in without an 8K board, each rear button is wired to a face button or D-pad direction of your choice. What you can map them to.

OptionNew controllerSend-in
2 round rear buttons£19.00£19.00
4 round rear buttons£29.00£29.00
Round rear buttons: lower positionFreeFree
2 DSE-style rear buttonsBoth paddle shapes come in the box, half-dome and lever. They're held on by magnets, so you can swap them whenever you like. The magnets can slightly affect TMR thumbsticks. If that bothers you, leave these out or ask us about a fixed set without magnets.£29.00£29.00
Kailh switches, our standard: 74gf (blue), 90gf (white) and 120gf (black). Omron switches, on request: 60gf (blue) and 120gf (white).

Click force

Click force is how hard you press before a switch clicks. It's measured in grams-force (gf): the lower the number, the lighter the press.

When you choose instant-click buttons, extra bumpers or rear buttons, you can choose their click force too. Our standard is 90gf for the face buttons and D-pad, 120gf for the bumpers, triggers and extra bumpers, and 160gf for the rear buttons. Changing it is free and doesn't add to your build time.

When you choose instant-click face buttons and D-pad, you can also choose a 3-layer feel for them: a silicone layer and a spring over each switch, for a softer, bouncier press. They add a little to the force, so the 3-layer feel only comes with 74gf switches.

We fit Kailh switches as standard. Omron switches are also available, in 60gf, 74gf or 120gf only. To have them, add a note to that controller in your cart: say which buttons, and 60gf, 74gf or 120gf.

Want a different click force or a different kind of switch? Ask us for a quote.

OptionNew controllerSend-in
Face buttons and D-pad: 3-layer instant-clickA silicone layer and a spring over each switch, for a softer, bouncier press. Comes with 74gf switches.FreeFree
Face buttons and D-pad: 74gf switchesFreeFree
Face buttons and D-pad: 120gf switchesFreeFree
Bumpers: 90gf switchesFreeFree
Bumpers: 160gf switchesFreeFree
Triggers: 90gf switchesFreeFree
Triggers: 160gf switchesFreeFree
Rear buttons: 90gf switchesFreeFree
Rear buttons: 120gf switchesFreeFree
Extra bumpers: 90gf switchesFreeFree
Extra bumpers: 160gf switchesFreeFree
The original battery (1,000 mAh, about 25–30 g) and the two rumble motors (about 13–17 g together).

Weight reduction

Take out parts you don't need to make the controller lighter. Both are free. The original 1,000 mAh battery weighs about 25–30 g, and the two rumble motors about 13–17 g together. New TankOtter Custom controllers already come without a battery. On a send-in, we recycle any battery we take out, and the rumble motors come back with your controller. Some mods need these parts out anyway: the 8K boards need both (the HeliumStrike 2 8K only the battery), DSE-style rear buttons need the battery out, and round rear buttons need the rumble motors out. The builder adds them for you.

OptionNew controllerSend-in
No batteryAbout 25–30 g lighter, and wired only from then on. We recycle your battery.IncludedFree
Rumble motors removedAbout 13–17 g lighter (both motors), with no vibration.FreeFree

Good to know

  • No battery: the controller only works plugged in with a USB cable.
  • No rumble motors: the controller won't vibrate.